Daily operation procedures and precautions of cement brick machine

Daily operation procedures and precautions of cement brick machine:

1. Before the installation and use of the cement brick machine, the user must carefully read this manual. If you have any questions, please call us nianpeng machinery in time. Moreover, in order to correctly use and maintain the operation of the cement brick machine equipment, the maintenance personnel must understand the performance and characteristics of the equipment in detail, and do not operate at will, so as not to hurt people and damage the machine parts.

2. During inspection and maintenance, the main power supply shall be cut off and an alarm sign shall be hung. For moving parts in the equipment, non staff shall not approach. When all parts are in place, they can be operated automatically. Operators other than computer control cabinet are not allowed to press the button at will to avoid personal injury and machine damage.

3. The cement in the storage hopper shall be used up in time to prevent solidification. During use, the electrical of the machine shall be reliably grounded for safety. After each shift, the electrical switch shall be in the "power off" or "stop" position.

4. The selection of hard bone material shall adapt to the side holes of the mold box, and hard foreign matters shall not be mixed into the material to prevent damage to the cement brick machine mold. The vibration forming time shall be strictly controlled. If the forming time is long and the indenter cannot be pressed down, the amount of cloth shall be adjusted. At the end of forming, if the material is not enough, do not press down the indenter to form, so as to prevent damage to the indenter oil cylinder and the indenter synchronization structure, resulting in non synchronization of the indenter.

5. Check whether each travel switch of cement brick machine equipment is in place at any time. If it is loose, adjust and tighten it in time. The distance between the end of travel switch and sensing block is 5-8mm to prevent damage. The condenser on the hydraulic station must be used in summer, otherwise the oil will heat up and affect the normal use. The oil shall be supplemented and replaced in time. The filter element shall be replaced in time according to the instructions of the flood generator, otherwise the hydraulic system will fail.

6. Replace the rubber scraper on the feed hopper in time and adjust the gap, otherwise the material will leak and the pressure head will stick. All bolts shall be tightened before use. The vibration platform, the upper plane of the plate feeder and the upper plane of the brick feeder must be flat, otherwise the supporting plate of the brick machine cannot be transported smoothly, and the blocks cannot be pushed out or cracked. The solidified concrete on the brick machine support plate shall be cleaned in time, and all lubricating parts shall be lubricated before each shift. In addition, relevant personnel are required to clean up in time after each shift.

The above is a brief introduction to the daily operation procedures and precautions of cement brick machine made by onnoh machinery company. In fact, whether for enterprises or users in the machinery industry, the safety of machines is very important, which is directly related to the personal safety of staff. Especially for large-scale mechanical equipment, operators must comprehensively learn the key points of operation before use, and it is very important to strengthen safety awareness.