How to clean the hydraulic system of concrete block making machine

The maintenance of concrete block making machine plays an important role in the long-term stability and normal operation of the equipment. The cleaning of hydraulic system is the key step to maintain the equipment of concrete block making machine.

1. The cleanliness is usually determined by the particle count and indicated by the official operating status code of cleaning to achieve a certain index.

2. During the cleaning process of the concrete block making machine, the hydraulic pump operation and the cleaning medium heating are carried out at the same time, and the oil temperature is 50 to 90 ℃.

3 the hydraulic system of the concrete block making machine shall be cleaned for more than three times. After each cleaning, when the oil is hot, all the oil is released from the system. After cleaning, clean the filter, replace it with a new one and add new oil.

4 when cleaning the oil pipeline, it is recommended to install a filter screen or a filter screen to effectively filter the material out of the silo and achieve a good cleaning effect.

5. Use large flow to remove impurities from the system as much as possible.

6. In the process of cleaning the hydraulic pump, it is more conducive to improve the intermittent operation of the hydraulic pump and make the cleaning effect more obvious, otherwise, it will not be cleaned.

7 pay attention to the maintenance of hydraulic components or replace hydraulic components in time.

Concrete block making machine equipment

Good maintenance of concrete block making machine equipment is beneficial to the enterprise. It can not only prolong the service life of the equipment, but also reduce the cost of the enterprise, and make the enterprise work efficiently and stably. Production to maximize benefits.