block machine sensor photoelectric switch

The inductor limit switch is improved based on the photoelectric switch rotary detector in order to better meet the needs of users. The product can effectively and timely deal with the faults of mechanical rotating devices such as cement brick making machine (belt conveyor, elevator, bucket elevator, chain conveyor, belt scale and screw conveyor), such as locked rotation, stuck rotation, overload slow rotation, belt slip, falling off of rotating chain (belt) and fracture of rotating shaft, so as to ensure production and protect equipment.

block making machine sensor photoelectric switch is based on the photoelectric characteristics of photoelectric elements, its light flux changes with the measured, and the photocurrent becomes the measured function, so it is called the function application state of photoelectric switch. It can be used as photoelectric colorimeter, photoelectric displacement sensor, photoelectric rangefinder, etc.

Product parameters

working voltage 15... 30VDC

Installation mode ----------

Detection distance 10... 100mm

Outline specification M18*1*65

Output mode 0~10V ，4-20mA

working frequency 80Hz

Consumption current ≤20mA

output signal PNP simulation

Switch point offset ≤±10%

Load current ≥ 4.7K Ω (voltage output) ≤ 470 Ω (current output)

lagging 3... 15%

Repetition accuracy ≤1%

LED display ------------

protect Short circuit, reverse polarity and overload protection

working temperature - 10... 50℃

temperature drift < ±10%

Degree of protection IP67

Shell material Nickel plated brass

Inspection surface material PBT

Wiring mode Cable 2m, outer diameter ￠ 4.8mm